Thanks! Our team will review your request and send you access within 1 business day.
Check your email at .
⏳
Access Pending
Your account is being reviewed by our team. You'll receive an email once approved.
⛳ TruSim Systems — Product Configurator
LIVE TECHNICAL DRAWING · CONFIGURE BELOW · UPDATES INSTANTLY
0 Customer Info
1 Screen Fabric
Triple Layer ImpactTriple Layer High ContrastSingle Layer ImpactSingle Layer Impact BackerArcher Net Backer
BlackWhite
RegularHeavy
⚠️ Heavy Archer Net Backer will be seamed horizontally due to raw material width restrictions.
⚠️ Material Width Note: This fabric is 124" wide raw. Your total required height
(—) exceeds 124". An additional horizontal seam
will be required. This will be noted on the drawing.
2 Screen Dimensions
3 Angled Top Corners
No — Standard RectangleYes — Angled Corners
Enter the top edge width and the height from the bottom where the angle begins. The cut depth per side calculates automatically.
4 Bottom Pocket
YesNo
1"2"3"4"
BottomTop
No — pocket adds to heightYes — pocket is within height
5 Perimeter — Per Edge Configuration
⚠️ Reinforcement Required: You have selected Grommets or Webbing Loops as your attachment method. Edges receiving grommets or loops must have Hook Velcro, Loop Velcro, or Webbing — None is not permitted on those edges.
Configure each edge independently. Choose material type, width, color, and location (front, back, or both sides of the fabric).
Top Edge TOP
Front Face
NoneHookLoopWebbing
1"2"3"4"
WhiteBlack
Back Face
NoneHookLoopWebbing
1"2"3"4"
WhiteBlack
Bottom Edge BOTTOM
Only needed when grommets or loops are required at the bottom. Pocket (if enabled) is always sewn regardless.
Front Face
NoneHookLoopWebbing
1"2"3"4"
WhiteBlack
Back Face
NoneHookLoopWebbing
1"2"3"4"
WhiteBlack
Left Side LEFT
Front Face
NoneHookLoopWebbing
1"2"3"4"
WhiteBlack
Back Face
NoneHookLoopWebbing
1"2"3"4"
WhiteBlack
Right Side RIGHT
Front Face
NoneHookLoopWebbing
1"2"3"4"
WhiteBlack
Back Face
NoneHookLoopWebbing
1"2"3"4"
WhiteBlack
6 Attachment Method
GrommetsWebbing LoopsNone
⚠️ Reinforcement Required: Grommets punched directly into screen fabric will cause tearing. At least one perimeter edge (hook velcro, loop velcro, or webbing) must be present on any edge receiving grommets.
#4 ONLY
BLACK ONLY
8" O.C.12" O.C.16" O.C.24" O.C.
Top OnlyTop + SidesAll 4 Sides
Hook VelcroLoop VelcroWebbing
Grommets must be punched through a reinforcing material — not directly through screen fabric.
Loops are always 1" wide white webbing, folded to 1.5" and box-tacked. The exposed loop protrudes perpendicular to the screen edge.
1"2"3"
Top OnlyTop + SidesAll 4 Sides
8" O.C.12" O.C.16" O.C.24" O.C.
VARIABLE SIDE SPACING
Optionally use tighter spacing near the bottom of the sides for extra tension at the base.
YesNo
inches from bottom
6"8"12"
12"16"24"
✓ Summary
Width192"
Screen Height108"
Overall Height110"
Angled Corners—
Top Edge—
Bottom Edge—
Left Side—
Right Side—
Attachment—
Pocket—
0 Customer Info
1 Fabric
15oz Velour22oz Velour
61" wide panels. Panels joined with butterfly seam (1" overlap, single needle, clean front face).
2 Finished Dimensions
3 Wall Type
Single WallDouble Wall
Double wall folds the panel vertically — cut width = finished width × 2. Two layers of fabric. Priced at 2× sq ft rate.
4 Side Edges
Each side loses 1.5" to hems. Face side = nap/fluffy side (visible). Back side = non-nap side.
Configure left and right independently with front and back face options.
3" Hem (standard)Pipe PocketHook VelcroLoop VelcroSerge / Overlock
2"3"
InsideOutside
✓ Summary
Width—
Height—
Fabric—
Wall Type—
Panels—
Top Edge—
Bottom Edge—
Left — Finish—
Left — Face Side—
Left — Back Side—
Right — Finish—
Right — Face Side—
Right — Back Side—
Qty—
Customer—
PO / Order #—
0 Customer Info
1 Material
Black Felt / Carpet1050 Ballistic Nylon1680 Ballistic Nylon
60" wide. Acts as loop velcro — adheres directly to hook velcro on screen frame. Can be single or double thickness.
2 Thickness
Single LayerDouble — Folded Over
Cut width = finished width × 2. Folded in half lengthwise. 4 sewing lines: both open long edges + both short ends. Fold side also sewn for clean finish. Max finished width: 30" (uses full 60" fabric).
Ballistic nylon is single layer only — coated face side out, weave visible.
3 Finished Dimensions
⚠ Double layer max finished width is 30" — cut width would be 60" (full fabric). Clamped to 30".
ℹ Length exceeds 60" — panel will require a seam join. Multiple sections will be sewn end-to-end.
4 Velcro (optional)
Add hook or loop velcro to any edge. Felt naturally acts as loop velcro — typically only hook velcro is added to felt panels.
Top TOP
NoneHookLoop
2"3"
BlackWhite
Bottom BOT
NoneHookLoop
2"3"
BlackWhite
Left LEFT
NoneHookLoop
2"3"
BlackWhite
Right RIGHT
NoneHookLoop
2"3"
BlackWhite
ℹ Both face side and back side will have felt exposed — both surfaces naturally act as loop velcro.
Add hook or loop velcro to any edge on either face.
Face Side (Nap Out) FRONT
Left Edge
NoneHookLoop
2"3"
BlackWhite
Right Edge
NoneHookLoop
2"3"
BlackWhite
Top Edge
NoneHookLoop
2"3"
BlackWhite
Bottom Edge
NoneHookLoop
2"3"
BlackWhite
Back Side (Felt Exposed) BACK
Left Edge
NoneHookLoop
2"3"
BlackWhite
Right Edge
NoneHookLoop
2"3"
BlackWhite
Top Edge
NoneHookLoop
2"3"
BlackWhite
Bottom Edge
NoneHookLoop
2"3"
BlackWhite
✓ Summary
Material—
Finished Size—
Cut Size—
Thickness—
Top—
Bottom—
Left—
Right—
Technical Drawing — Live Preview Updates as you type
Fabric
Triple Layer
Width
192"
Screen Ht
108"
Overall Ht
110"
Top
—
Bottom
—
Sides
—
Grommets
—
Customer
—
Cost View ADMIN
Fabric
—
Trim
—
Grommets
—
Labor
—
Cost → Sell
—→—
Margin
—
Show price to customer
Your Price
—
👤 My Profile
Ship-To Addresses
— saved for each PO
💾 Save Quote
Loaded:
📋 My Orders
Loading orders…
📂 Load Quote
Loading quotes…
📄 Loaded:
SUBMIT ORDER — TRUSIM SYSTEMS
STEP 1 OF 4 — REVIEW & SIGN
Review Your Configuration
Sign to Confirm Specifications
By signing below you confirm the specifications shown are correct.
Sign in the box above
⚠ Please provide your signature to continue.
Are you an existing Canwil / TruSim customer?
If you've ordered from us before, select Yes. If this is your first order, select No to complete a quick new customer setup.
Please confirm your company name and email on file so we can verify your account:
⚠ We will verify your account against our records before processing. If we cannot locate your account we will contact you.
⚠ Please fill in your company name and email.
CANWIL TEXTILES, INC.
1520 University Drive, Auburn, GA 30011 · Ph: 678-985-5434
⚠ You selected Sales Tax Exempt. Please email your completed Sales Tax Exemption Form to [email protected] after submitting this form.
PO Contact
A/P Contact (if different from PO contact)
Terms Requested
Credit Card Payment: To pay by credit card, please download the Canwil Textiles Credit Card Authorization Form, complete it, and email it to [email protected].
Please provide at least 3 credit references (company name, phone, and email are required). You will also need to provide bank information. We will contact your references and bank to process your application.
Business Information
Credit References (minimum 3 — company name, phone, and email required)
${[1,2,3].map(n=>`
REFERENCE ${n}
`).join('')}
Bank Information
By submitting this form you authorize Canwil Textiles, Inc. to contact the above bank and credit references.
Shipping
⚠ Please fill in all required fields marked with *
📋
Complete Your Customer Setup
A new tab has opened with your customer setup form.
Fill it out and submit — then come back here and click the button below.
In the new tab:
1. Fill in your company and contact information
2. Choose your payment terms (Credit Card, Wire, or NET 30)
3. Sign and submit the form
4. Return to this tab
📋
Ready to Submit
Review the summary below then click Submit Order. A confirmation will be sent to your email and to our team.
Shipping
⚠ Something went wrong. Please try again or email us directly.
✓ Order Submitted Successfully!
Your order and new customer form have been sent to our team. We will review and contact you within 1 business day. Please email all Purchase Orders to [email protected]